Question 1

Can I use the Solo Stove Lloyd™ 2.0 indoors and outdoors?

Accepted Answer

Yes. Lloyd™ 2.0 is a gel fuel fireplace designed for indoor spaces and covered outdoor areas like a patio, gazebo, screened porch, or three-season room. Because it burns clean Solo Stove Pure Gel Fuel, you get a real flame without the smoke, ash, or mess of wood. Avoid uncovered outdoor spaces and windy or rainy conditions, which can cause water pooling, unsafe operation, and sub-par performance. If you use it indoors, follow the placement, clearance, and ventilation guidelines in the manual and check your local codes.

Question 2

Does the Lloyd™ 2.0 give off real heat? How many BTUs does it produce?

Accepted Answer

Yes. This isn’t just a decorative flame. Lloyd™ 2.0 produces about 9,000 BTUs of real heat when burning all 3 gel cans. It’s designed to direct warmth outward toward you, while radiant heat gently warms the room.

Question 3

Does the Lloyd™ 2.0 require assembly?

Accepted Answer

No construction or permanent installation is required. Follow the included setup instructions to get Lloyd™ 2.0 ready for its first fire on a stable, level surface.

Question 4

What is the Lloyd™ 2.0 fireplace made of?

Accepted Answer

Lloyd™ 2.0 is built with powder-coated steel and a tempered glass windscreen. The construction is designed to resist wear and hold up over time, and it’s backed by Solo Stove’s limited lifetime warranty.

Question 5

What home styles does the Lloyd™ 2.0 work in?

Accepted Answer

Lloyd™ 2.0 has a mid-century modern aesthetic, so it’s a natural fit for homes in that style. Its clean lines and warm glow also complement modern, contemporary, and transitional spaces , adding a cozy, inviting atmosphere wherever it lands.

Question 6

What’s new in the Lloyd™ 2.0 compared to the original Lloyd?

Accepted Answer

Lloyd™ 2.0 keeps the signature ambiance of the original and refines it with: Superior materials and construction A lower center of gravity for improved stability A built-in Aroma Tray for fragrance diffusion A new curved burner and glass barrier for a more natural flame pattern A new flat-back, space-saving profile

Question 7

What is the Aroma Tray, and how do I use essential oils with the Lloyd™ 2.0?

Accepted Answer

The Aroma Tray lets you add scent to the warmth and light of the fire. Before lighting, add essential oils and water, or a few wax melts, to the tray. Use it only as described in the manual. Essential oils are flammable, so never add oils while the fire is lit or the tray is hot. Keep oils out of reach of children and pets, and consult an expert if you have concerns about essential oil use.

Question 8

Does the Lloyd™ 2.0 come with a warranty?

Accepted Answer

Yes. Lloyd™ 2.0 comes with Solo Stove’s limited lifetime warranty, with some international exceptions.

Question 9

What fuel does the Lloyd™ 2.0 use?

Accepted Answer

Lloyd™ 2.0 runs on  Solo Stove Pure Gel Fuel , a clean-burning, renewable fuel that produces no smoke, ash, or residue. Using the recommended fuel ensures the best performance and longevity of your fireplace. Always follow the product manual for fueling instructions.

Question 10

Can I use other bio-ethanol or gel fuels in the Lloyd™ 2.0?

Accepted Answer

No. Use only Solo Stove  Pure Gel Fuel  with Lloyd™ 2.0. Other fuels may affect performance, void your warranty, or create unsafe conditions. When in doubt, stick with what Solo Stove recommends — we've got you covered. Fuel is available  here .

Question 11

Can I use Citronella Gel Fuel in the Lloyd™ 2.0?

Accepted Answer

Yes, but only in a covered outdoor space. Do not use  Citronella Gel Fuel  if your Lloyd™ 2.0 is indoors.

Question 12

How long does Solo Stove Pure Gel Fuel burn?

Accepted Answer

Each can of  Pure Gel Fuel  burns for about two hours. Do not relight cans that have already burned and been extinguished.

Question 13

Where can I buy replacement Pure Gel Fuel for the Lloyd™ 2.0?

Accepted Answer

Pure Gel Fuel  is available at solostove.com. We recommend keeping a supply on hand so the mood is never interrupted.

Question 14

What surfaces can I place the Lloyd™ 2.0 on?

Accepted Answer

Place Lloyd™ 2.0 on a stable, flat, non-flammable surface such as tile, stone, brick, or concrete. Avoid wood decks, rugs, or any combustible surface without proper protection. Keep the area around and beneath it clear of anything flammable.

Question 15

Can the Lloyd™ 2.0 be mounted on a wall?

Accepted Answer

No. Lloyd™ 2.0 is a freestanding fireplace and isn’t designed for wall mounting. Its flat-back design and lower center of gravity keep it stable on any appropriate surface.

Question 16

Does the Lloyd™ 2.0 need to be placed against a wall?

Accepted Answer

No, but the flat-back design makes it a natural fit along a wall, on a console, or in a corner. Its compact footprint lets you tuck it in wherever it makes the most impact. Maintain 6-inches of clearance from walls and combustible surfaces as outlined in the product manual.

Question 17

How do I light and extinguish the Lloyd™ 2.0?

Accepted Answer

Place three cans of Pure Gel Fuel in the fireplace and light them according to the instructions. There’s no wood or kindling to deal with. To put the fire out, let the cans burn out or extinguish them with the included snuffing tool, as directed in the manual  with the included the gel can tool.  Never add, move, or open fuel cans while the fire is burning or hot, and never leave the fire unattended.

Question 18

How do I safely replace the fuel cans in the Lloyd™ 2.0?

Accepted Answer

Extinguish the flame completely and let the fireplace cool fully before removing and replacing the Pure Gel Fuel cans. See the product manual for detailed steps.

Question 19

Can I touch the Lloyd™ 2.0 while it’s in use?

Accepted Answer

No. The surface is very hot when lit, so allow it to cool fully before handling. The glass barrier helps protect against wagging tails and little fingers, but keep kids and pets away from the fireplace while it’s burning.

Question 20

How much ventilation does the Lloyd™ 2.0 need indoors?

Accepted Answer

Use Lloyd™ 2.0 in a normally ventilated room, one with windows, doorways, or reasonable airflow. You don’t need special venting or ductwork. Avoid very small, sealed spaces, and follow the guidelines in the product manual.

Question 21

Does the Lloyd™ 2.0 produce carbon monoxide?

Accepted Answer

Yes. Like any combustion product, Lloyd™ 2.0 produces carbon monoxide and other byproducts. Pure Gel Fuel burns cleanly and produces minimal byproducts compared to wood or gas. Use Lloyd™ 2.0 in a well-ventilated space, never in a sealed or unventilated room, and keep working carbon monoxide and smoke alarms nearby. People with breathing issues should consult a physician before use.

Question 22

Can you make s’mores on the Lloyd™ 2.0?

Accepted Answer

No,  Lloyd™ 2.0  should not be used for roasting or any other method of cooking.

Lloyd™ 2.0 Modern Fireplace + Pure Gel Fuel

Lloyd™ 2.0 Modern Fireplace + Pure Gel Fuel