Solo Stove Fire Pits are designed to create the perfect, roaring fire no matter where you use them - but it's worth being mindful of the surface underneath to protect it from heat.
Solo Stove Stands are designed to keep surfaces cool while your Solo Stove Fire Pit rages above. Made of sturdy, heat-resistant 304 Stainless Steel, the Stand is our most popular fire pit accessory - now included with every pit! Each size is built to fit a specific fire pit model and nests neatly inside for storage.
Quick Answer: Do I need a fire pit stand? Yes, if you're burning on a wood deck, composite/PVC decking, green grass or sand. No, if you're burning on concrete, stone, pavers, gravel, or dirt - though a stand never hurts if you want extra piece of mind.
Surface-by-Surface Comparison
Wooden Deck - YES! Use a stand. Untreated wood ignites at 356°F. Since most decks are treated with a stain or sealant, it is required that you use a Stand when burning your fire pit on a wooden deck. If you are planning a burn longer than an hour or two, using pavers under your Stand is the best way to ensure your deck stays beautiful and safe. Stand will still lift your fire pit, allowing cool air to circulate under it for a cooler base and a safer burn.
Composite and PVC Decking - YES! Use a stand. Composite decking, such as Trex, TimberTech, Azek, TIVA, Nexan, and Versadeck, have a manufacturer fire resistance rating from A to C. Check with your manufacturer or builder for what grade decking you have beforehand. To be safe, using a Stand is required at all times when burning on composite and PVC decking.
Green Grass - YES! Use a stand. Green grass can burn at 518° F. Depending on the hardness of the wood and the duration of the burn, Solo Stove Fire Pits could potentially scorch your grass. Stands should be used with the fire pit at all times when burning on green grass.
Sand - Recommended to use a stand. When taking your fire pit on the beach, you are normally safe to use the fire pit without the stand. However, if you do not clear a level surface on the sand, sand can obstruct the lower vent holes of the fire pit. We recommend using a stand when using your fire pit on sand to provide enough space around the fire pit’s lower vent holes.
Concrete or Pavement - Not necessary to use a stand. Concrete doesn’t break down until it is exposed to over 1,000° F. Under normal recommended use (3-4 hours), Solo Stove Fire Pits will not get hot enough to break down concrete. However, if you are burning the fire pit on painted, stained, or stamped concrete, you SHOULD use a Stand to ensure no damage is done to the concrete finish.
Stone, Pavers, or Gravel - Not necessary to use a stand. The same rule applies here as with grassy surfaces. If you are worried about scorching grass that grows between stones, grab a Stand. However, Solo Stove fire pits are generally safe to burn on stone, pavers, or gravel.
Dirt - Not necessary to use a stand. Before starting a fire on dirt, clear away dry debris such as dry leaves or sticks from underneath the fire pit. Dirt poses no risk to being scorched and is completely safe to use your fire pit on.
If you're ever unsure, using the stand is the safe default. Using the stand lets you burn on virtually any surface without worrying about what's underneath. When you’re ready to use your fire pit, place the stand on a level surface and center the fire pit in the middle. Start and use your fire pit as normal and enjoy!
Frequently Asked Questions
Does a stand create better airflow? No. While the stand has holes similar to the base of the fire pit, they don't add airflow inside the burn chamber. They're there to help radiate residual heat away from the bottom of the fire pit rather than concentrating it on the surface below.
What is the Stand made of? 304 Stainless Steel. The same material used in the fire pits themselves.
Where do I store it? The Stand nests conveniently inside your fire pit when not in use.
What if I want to leave my Fire Pit outside? Pair the stand with a Shelter for full weather protection. A Shelter repels rain and snow so you can keep your fire pit in place year-round. For quick overnight coverage between burns, a Lid works well too.
Do I need a stand on every surface? No, though it is strongly recommended on heat-sensitive surfaces like wood decks, composite decking, grass, and sand. It is not necessary to use a stand on concrete, stone, pavers, or dirt.
Can I use a fire pit on painted or stamped concrete without a Stand? Not recommended. While plain concrete can handle the heat, painted, stained, or stamped finishes can be damaged - use a stand to protect the finish.
Shop all fire pits and stands -->
