Question 1

How long will a fire pit full of pellets burn?

Accepted Answer

You can expect approximately 2 hours of burn time from a fire pit full of pellets. Depending on the type of pellets you use, this time can be extended or decreased slightly. Hardwood pellets will burn for slightly longer, while softwood pellets will burn more quickly. Be sure that your fire pit is completely cooled before leaving it unattended. After the flames die down, the fire pit will still be hot to the touch.

Question 2

Do I need to fill my fire pit to the top in order to achieve a secondary burn?

Accepted Answer

No, you don’t! Pellets provide an even and consistent burn, meaning you can achieve a smokeless, secondary flame with only a few inches of pellets in your pit.

Question 3

Will pellets always burn for 2+ hours?

Accepted Answer

The duration of your fire will depend on the amount of pellets you put into your fire pit. If you fill your pit to the top (about 1” below the secondary burn holes), you will have flames for 2+ hours. If you want to have a shorter fire, simply add fewer pellets. ½ the number of pellets will burn for approximately half the time.

Question 4

What is the max capacity of pellets in each fire pit?

Accepted Answer

Pellets can be added until they are 1 inch below the secondary burn holes on the interior of the fire pit. Feel free to add fewer pellets if you’d like a shorter burn. Ranger - 11 kg,  Bonfire - 20,5 kg Yukon - 35 kg

Question 5

What kinds of pellets can I use with my fire pit pellet adapter?

Accepted Answer

You can burn virtually any type of wood pellet in your Solo Stove Fire Pit with Pellet Adapter. Each type of pellet will provide a different experience and can influence your purchasing decision. Heating pellets are designed to be used as fuel only, and should not be cooked over. They are typically made of softwoods and will burn at a slightly quicker pace. Hardwood pellets (like Solo Stove’s Premium Wood Fuel Pellets) are a great option and will burn beautifully. If you want to roast s’mores or hot dogs, make sure that your hardwood pellets are food-safe. Pellet grill smoking pellets can also be used to burn with the Pellet Adapter. Softwood Pellets are typically made of a variety of softwoods such as pine and/or fir. These pellets can contain binders and additives, but can still be burned efficiently with the Pellet Adapter. These pellets should not be used for any cooking.

Question 6

Can I use my other Solo Stove accessories when I’m burning pellets?

Accepted Answer

Absolutely! The pellet adapter sits on top of the base plate and will not interfere with any accessories placed on top of the fire pit. If using Pi Fire or Cast Iron Cooktops, ensure that your pellets are food safe. Additionally, do not place your Cast Iron Cooktop or Pi Fire on the fire pit until the secondary burn and flame height begins to decrease. It’s recommended to use Mini Oak Firewood, or other small wood chunks, to maintain heat after the pellets have burned down.

Question 7

Will I get a secondary burn with pellets?

Accepted Answer

Yes, you will! When using the pellet adapter in your fire pit you can expect to get a beautiful secondary burn within 15 minutes of lighting your starters (depending on how many starters you use.) With a full fire pit, this secondary burn can last for 2 hours regardless of the size of your fire pit.

Question 8

How do I clean the pellet adapter?

Accepted Answer

After your fire pit has cooled completely, remove the pellet adapter using the integrated handle, and dump the ashes into a fire-safe bin. If there is residue on the adapter afterward, use a stiff bristle brush to clear away any debris.

Question 9

How many fire starters should I use to start my pellet fire?

Accepted Answer

Feel free to use as many fire starters as you feel necessary. The following quantities, evenly spaced around the opening of the fire pit, produced a secondary burn within 15 minutes of lighting them: Ranger - 4 Starters Bonfire - 5 Starters Yukon- 6 Starters Canyon - 7 Starters

Question 10

My fire blew out and is super smoky, how can I fix this?

Accepted Answer

Pellet fires are more prone to being blown out from gusts of wind. This is rare, but can occur. If this happens while your fire is lit, there will immediately be an intense cloud of smoke. If this happens to you, take a long-stem lighter, light it, then place it near the secondary burn holes near the top of your fire pit, and let the smoke ignite. This will clear out the smoke and reignite your fire quickly.

Question 11

How do I add pellets to my fire?

Accepted Answer

It’s important not to add too many pellets at a time, as this could suffocate your flame and cause your fire to smoke and be extinguished. Use a small garden shovel to add 2-3 cups of pellets at a time, sprinkling them evenly across the opening of the fire pit. Be sure to add pellets while there is still a secondary flame. Adding pellets after the fire has gotten too low will cause the newly added pellets to smoke and not light correctly.

Question 12

Can I use pellets and wood at the same time?

Accepted Answer

Yes, you can! After inserting your pellet adapter, fill your fire pit with 3-4 inches of pellets, place starters evenly around the top of them, and light the starters. Add pieces of firewood as needed after your fire achieves secondary burn (or about 10-15 minutes).

Question 13

Have more questions?

Accepted Answer

Click here  to view product and safety instructions.

Fire Pit Pellet Adapter

Features & Benefits